generating surface
英 [ˈdʒenəreɪtɪŋ ˈsɜːfɪs]
美 [ˈdʒenəreɪtɪŋ ˈsɜːrfɪs]
网络 蒸发面
双语例句
- The test results show that the proposed approach is effective and efficient in automatically generating the parting surface of the molded part.
实例测试表明，该方法具有较高的效率和实用性。 - Implementation of Automated Generating Fillet Surface Inside of Corners to Avoid Undercut in Rough Machining
为防止粗加工过切的自动倒内圆角功能的研究与实现 - A new algorithm of geodesic generating based on meshed surface is proposed according to the definition of geodesic, with the features of efficient, high-accuracy etc.
根据测地线定义构造了一种基于网格化曲面的测地线新算法，具有高效率、高精度等特点； - Algorithm of Generating Panorama of Cube Surface Based on Texture Technique
基于纹理技术生成立方体表面全景图的算法 - Elaborate the basic mechanism and principle of the three coordinate measuring machine, and rapid prototyping manufacturing technology. Adduced the method of generating the curved surface directly by using software I-DEAS.
阐述了三坐标测量机的基本机构、工作原理和快速原形技术，提出了用I-DEAS软件直接生成曲面的方法。 - The causes of the formation of space-layer structure are: 1. The shifting of the highest temperature surface and the main frictional beat generating surface away from the contact surface due to the difference in the thermophysical properties of the two metals.
这种空间层状结构产生的原因是：（1）两种金属热物理性能的不同，引起最高温度面及主要摩擦发热面偏离接触面； - The equation of the imaginary crown generating surface and the partial derivatives are deduced, so the differential geometric parameters of the generating surface can be obtained.
推导了假想产形面的方程和各阶偏导矢，于是可获得产形面的微分几何参数。 - Formulas for the flash temperature on the tooth surface of a Double Enveloping Worm Gearing with Planar Generating Surface has been derived from Blok's flash temperature formula.
以Blok闪温公式为基础，推导了适用于平面二次包络环面蜗杆传动的齿面闪温计算公式； - Spiral bevel gears carbide skiving cutter has designed by method of inclination cut and straight line profile, and the generating surface of cutter is hyperbolic but conic.
根据斜角直线齿形造形方法设计出的弧齿锥齿轮刮削刀盘产形面已不再是一个圆锥面，而是一个双曲面。 - Generating method of surface contour lines of eight-node hexahedron element in three dimensional FEM numeric simulation
基于六面体八节点单元的三维有限元数值模拟表面等值线的生成算法 - The main functions of the generating surface in this paper are as follows: construct pipe-line surface, interpolating surface, revolving surface and straight-grain surface.
系统曲面生成的主要功能有构造管道型曲面、超限插值曲面、旋转曲面和直纹面等。 - This paper discussed the principle and solution method about generating blending surface based on physical energy minimization in detailed. An example, blending surfaces between the aerofoil and the body of aerocraft, is shown.
详细讨论了基于物理的能量最小法构造过渡曲面的原理及求解方法，并给出了飞行器的翼身融合过渡实例。 - Based on study of linear fractal interpolation that is offen used in generating rock fracture surface, it is proved that, when the interpolation data have a small perturbation, the corresponding linear fractal interpolation curves ( surfaces) also have a small perturbation.
基于对岩石断面生成过程中通常所用线性分形插值稳定性的研究，表明无论数据点（插值结点）存在横向、纵向还是综合的微小摄动，得到的分形插值曲线也均只有相应的微小摄动。 - The study provides not only a simple algorithm for constructing fractal surface but also a theoretical basis for the generating of fractal surface and its practical application.
本文的研究为分形曲面的构造探求了一种简易算法，并为分形曲面的生成和实践应用提供了理论依据。 - Generating the forming surface of elements group is one of very important problems in multi-points forming.
基本体群成形曲面的生成是多点成形技术中十分重要的问题之一。 - Based on lots of literatures which related with surface roughness prediction, this paper mainly study the key techniques including influence factors and influence rules of machined surface roughness, generating mechanism of surface roughness, as well as prediction of machined surface roughness on multi-axis NC machining.
本文在参阅了大量相关文献的基础上，主要对数控加工表面粗糙度的影响因素和影响规律、表面粗糙度形成机理和多轴数控加工表面粗糙度的预测三项关键技术进行了研究。 - The MSCSM is like chromosome which takes decisive effect on analysing and generating the surface structures.
这一模型象染色体，对表层结构的分析和生成起着关键性作用。 - It has been proved that the conjugation in singular point must be formed on conditions that crossing angle and generating surface are arbitrary.
证明了在任意交叉角、母面为任意曲面的一般条件下，二次包络都必然可以形成奇点共轭； - A Method for Generating Fractal Surface of Coons Type
Coons型分形曲面的生成方法 - In FCDS. a model picked from the model bank is taken as the foundation for generating a contour surface, which makes the further design of the surface have some warranties in hydrodynamics.
FCDS以性能优良的库模型作为外形曲面生成的基础，使曲面的进一步设计有了一定的流体性能上的保证。 - Two approaches of generating offset surface of helicoid is proposed: directly from helicoid, and from the offset section curve.
考察了螺旋曲面生成两种等距曲面的方法：由螺旋面直接作等距曲面； - Method for Generating Additional Surface in Die Face Design of Automotive Panel
汽车覆盖件模面设计中补充曲面的生成方法 - Stability in Generating Rock Fracture Surface by Fractal Interpolation
岩石断面分形插值生成过程中的稳定性 - The method for controlling the shapes of generating surface by using the surface shape control factors and its applications and the implementation in autobody outer surface design are discussed. The attributes of this method are analyzed. Finally, some application examples in autobody design are presented.
研究了引入曲面形状控制系数来控制生成曲面的形状以及应用于车身外形曲面设计的实现方法，并分析了该方法的特点，最后给出了在车身设计中应用的实例。 - This paper at first analyzes several methods about generating blending surface, and points out the advantages of blending surface with G2 connectivity over with C2 connectivity. Then it puts forward a new modeling method about generating blending surface with G2 connectivity based on energy optimization.
提出一种基于能量法的G2连续过渡面的构造方法，着重分析过渡曲面能量优化模型的建立，边界约束、法矢方向一致约束以及主曲率相等约束的表达和处理。 - Applying the principles of differential geometry and kinematics, the relationship between the tool and flute surface has been established, and the mathematical model of micro-drill flute has been formulated based on the basic engagement condition between the generating tool surface and generated flute surface.
应用微分几何及运动学，在建立起刀具和螺旋面之间的基本啮合条件的基础上，得出了刀具和螺旋面之间的关系，建立了刀具及微钻头螺旋槽的数学模型。 - We have improved the implementation of the advancing front method ( AFM) according its general principle. And an adaptive method for generating surface elements has also been developed.
根据推进波前法实现的一般流程，对该方法进行了改进并开发了自适应曲面网格生成技术。 - The fast and effective techniques of generating smooth surface have received more favor in the application of surface modeling.
在曲面建模应用中，生成光滑形体表面的高效、快速的曲面造型技术倍受青睐。 - The algorithm for the calculation of coordinates of gear tooth surfaces base on both the generating surface and B-spline interpolation are studied in detail, and the applicability of the methods are discussed as well.
深入研究了基于产形面的齿面坐标点计算方法和基于B样条插值的齿面坐标点计算方法，并讨论了这两种方法的适用范围。